Linux version 2.6.23.1-49.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Nov 8 21:41:26 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS) BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 767MB LOWMEM available. found SMP MP-table at 000f5ae0 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 196592) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 196592 HighMem 196592 -> 196592 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 196592 On node 0 totalpages: 196592 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1503 pages used for memmap Normal zone: 190993 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap DMI 2.2 present. Using APIC driver default ACPI: RSDP 000F7370, 0014 (r0 ABIT ) ACPI: RSDT 2FFF3000, 002C (r1 ABIT AWRDACPI 42302E31 AWRD 0) ACPI: FACP 2FFF3040, 0074 (r1 ABIT AWRDACPI 42302E31 AWRD 0) ACPI: DSDT 2FFF30C0, 23DF (r1 ABIT AWRDACPI 1000 MSFT 100000C) ACPI: FACS 2FFF0000, 0040 ACPI: APIC 2FFF54C0, 005C (r1 ABIT 0 0) ACPI: DMI BIOS year==0, assuming ACPI-capable machine ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:6 APIC version 17 ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000) swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 195057 Kernel command line: ro root=/dev/md1 apm=power-off noapic console=ttyS0,115200 console=tty0 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07a8000 soft=c0788000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 467.741 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 771188k/786368k available (2184k kernel code, 14564k reserved, 1116k data, 280k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB) lowmem : 0xc0000000 - 0xefff0000 ( 767 MB) .init : 0xc073f000 - 0xc0785000 ( 280 kB) .data : 0xc0622165 - 0xc0739544 (1116 kB) .text : 0xc0400000 - 0xc0622165 (2184 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 936.28 BogoMIPS (lpj=468143) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 1820) CPU0: Intel Celeron (Mendocino) stepping 05 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07a9000 soft=c0789000 Initializing CPU#1 Calibrating delay using timer specific routine.. 935.34 BogoMIPS (lpj=467673) CPU: After generic identify, caps: 0183fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0183f3ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Celeron (Mendocino) stepping 05 Total of 2 processors activated (1871.63 BogoMIPS). checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=336 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=488 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1552 bytes Booting paravirtualized kernel on bare hardware Time: 10:00:18 Date: 11/26/07 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region 4000-403f claimed by PIIX4 ACPI PCI quirk: region 5000-500f claimed by PIIX4 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Time: tsc clocksource has been installed. pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved pnp: 00:00: iomem range 0xcf000-0xcffff has been reserved pnp: 00:00: iomem range 0xf0000-0xfbfff could not be reserved pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: d4000000-d7ffffff PREFETCH window: d8000000-d9ffffff NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3104k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1196071218.882:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key D5E5FC8EDCF186B6 - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Boot video device is 0000:01:00.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Expecting a [Reference] package element, found type EFC94B60 ACPI: Invalid passive threshold ACPI: Thermal Zone [THRM] (51 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 15:6:23 Freeing unused kernel memory: 280k freed Write protecting the kernel read-only data: 845k ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 5, io base 0x00009000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected md: raid1 personality registered for level 1 xor: measuring software checksum speed 8regs : 856.000 MB/sec 8regs_prefetch: 764.000 MB/sec 32regs : 480.000 MB/sec 32regs_prefetch: 452.000 MB/sec pII_mmx : 1188.000 MB/sec p5_mmx : 1228.000 MB/sec xor: using function: p5_mmx (1228.000 MB/sec) async_tx: api initialized (async) raid6: int32x1 125 MB/s raid6: int32x2 132 MB/s raid6: int32x4 144 MB/s raid6: int32x8 140 MB/s raid6: mmxx1 398 MB/s raid6: mmxx2 460 MB/s raid6: using algorithm mmxx2 (460 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 SCSI subsystem initialized libata version 2.21 loaded. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 scsi0 : pata_pdc202xx_old scsi1 : pata_pdc202xx_old ata1: PATA max UDMA/100 cmd 0x00019400 ctl 0x00019802 bmdma 0x0001a400 irq 11 ata2: PATA max UDMA/100 cmd 0x00019c00 ctl 0x0001a002 bmdma 0x0001a408 irq 11 ata1.00: ATA-5: ST340016A, 3.19, max UDMA/100 ata1.00: 78165360 sectors, multi 16: LBA ata1.00: configured for UDMA/100 ata2.00: ATA-5: ST340016A, 3.19, max UDMA/100 ata2.00: 78165360 sectors, multi 16: LBA ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST340016A 3.19 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA ST340016A 3.19 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > sd 1:0:0:0: [sdb] Attached SCSI disk md: md1 stopped. md: bind md: bind raid1: raid set md1 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux Tulip driver version 1.1.15 (Feb 27, 2007) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12 tulip0: MII transceiver #1 config 3000 status 7829 advertising 01e1. eth0: Lite-On 82c168 PNIC rev 32 at MMIO 0xdb020000, 00:A0:CC:5E:54:0F, IRQ 12. ata_piix 0000:00:07.1: version 2.12 scsi2 : ata_piix scsi3 : ata_piix ata3: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 ata4: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device input: PC Speaker as /class/input/input1 parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] input: Power Button (FF) as /class/input/input2 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 scsi4 : pata_hpt366 scsi5 : pata_hpt366 ata5: PATA max UDMA/66 cmd 0x0001ac00 ctl 0x0001b002 bmdma 0x0001b400 irq 11 ata6: DUMMY ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 scsi6 : pata_hpt366 scsi7 : pata_hpt366 ata7: PATA max UDMA/66 cmd 0x0001b800 ctl 0x0001bc02 bmdma 0x0001c000 irq 11 ata8: DUMMY md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md: md2 stopped. md: bind md: bind raid1: raid set md2 active with 2 out of 2 mirrors md: md3 stopped. md: bind md: bind raid1: raid set md3 active with 2 out of 2 mirrors device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com loop: module loaded ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata1: soft resetting port ata1.00: configured for UDMA/100 ata1: EH complete ata2.00: configured for UDMA/100 ata2: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata1.00: configured for UDMA/100 ata1: EH complete ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata1.00: configured for UDMA/100 ata1: EH complete ata2.00: configured for UDMA/100 ata2: EH complete sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 ata1.00: limiting speed to UDMA/66:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata2.00: limiting speed to UDMA/66:PIO4 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata1.00: configured for UDMA/66 ata1: EH complete ata2.00: configured for UDMA/66 ata2: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata1.00: configured for UDMA/66 ata1: EH complete ata2.00: configured for UDMA/66 ata2: EH complete sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata1: soft resetting port ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata1.00: configured for UDMA/66 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 05 fb 01 sd 0:0:0:0: [sda] Add. Sense: Scsi parity error end_request: I/O error, dev sda, sector 391937 ata1: EH complete md: super_written gets error=-5, uptodate=0 raid1: Disk failure on sda1, disabling device. Operation continuing on 1 devices sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: configured for UDMA/66 sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 05 fb 01 sd 1:0:0:0: [sdb] Add. Sense: Scsi parity error end_request: I/O error, dev sdb, sector 391937 ata2: EH complete md: super_written gets error=-5, uptodate=0 sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/66 ata2: EH complete ata2.00: limiting speed to UDMA/33:PIO4 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:01:fb:05/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:01:fb:05/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 05 fb 01 sd 1:0:0:0: [sdb] Add. Sense: Scsi parity error end_request: I/O error, dev sdb, sector 391937 ata2: EH complete md: super_written gets error=-5, uptodate=0 RAID1 conf printout: --- wd:1 rd:2 disk 0, wo:1, o:0, dev:sda1 disk 1, wo:0, o:1, dev:sdb1 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA RAID1 conf printout: --- wd:1 rd:2 disk 1, wo:0, o:1, dev:sdb1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:21:02:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:21:02:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:21:02:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:21:02:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:21:02:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:21:02:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:21:02:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:21:02:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:21:02:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:21:02:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:21:02:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out res 51/84:00:21:02:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) ata2: soft resetting port ata2.00: configured for UDMA/33 sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 1:0:0:0: [sdb] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 00 00 02 21 sd 1:0:0:0: [sdb] Add. Sense: Scsi parity error end_request: I/O error, dev sdb, sector 545 Buffer I/O error on device md0, logical block 68 lost page write due to I/O error on md0 ata2: EH complete sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:81:b4:a8/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out res 51/84:00:81:b4:a8/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) ata1: soft resetting port ata2.00: limiting speed to PIO4 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata2.00: BMDMA stat 0x64 ata2.00: cmd ca/00:08:81:b4:a8/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out res 51/84:00:81:b4:a8/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) ata2: soft resetting port ata1.00: configured for UDMA/66 ata1: EH complete ata2.00: configured for PIO4 ata2: EH complete sd 1:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: limiting speed to UDMA/33:PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:81:b4:a8/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out res 51/84:00:81:b4:a8/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:81:b4:a8/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out res 51/84:00:81:b4:a8/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:81:b4:a8/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out res 51/84:00:81:b4:a8/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:81:b4:a8/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out res 51/84:00:81:b4:a8/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:81:b4:a8/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out res 51/84:00:81:b4:a8/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 04 a8 b4 81 sd 0:0:0:0: [sda] Add. Sense: Scsi parity error end_request: I/O error, dev sda, sector 78165121 ata1: EH complete sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA md: super_written gets error=-5, uptodate=0 raid1: Disk failure on sda6, disabling device. Operation continuing on 1 devices sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA RAID1 conf printout: --- wd:1 rd:2 disk 0, wo:1, o:0, dev:sda6 disk 1, wo:0, o:1, dev:sdb6 RAID1 conf printout: --- wd:1 rd:2 disk 1, wo:0, o:1, dev:sdb6 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:11:b4:f6/00:00:00:00:00/e2 tag 0 cdb 0x0 data 4096 out res 51/84:00:11:b4:f6/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:11:b4:f6/00:00:00:00:00/e2 tag 0 cdb 0x0 data 4096 out res 51/84:00:11:b4:f6/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:11:b4:f6/00:00:00:00:00/e2 tag 0 cdb 0x0 data 4096 out res 51/84:00:11:b4:f6/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:11:b4:f6/00:00:00:00:00/e2 tag 0 cdb 0x0 data 4096 out res 51/84:00:11:b4:f6/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:11:b4:f6/00:00:00:00:00/e2 tag 0 cdb 0x0 data 4096 out res 51/84:00:11:b4:f6/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 ata1: EH complete sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:11:b4:f6/00:00:00:00:00/e2 tag 0 cdb 0x0 data 4096 out res 51/84:00:11:b4:f6/00:00:00:00:00/e2 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for UDMA/33 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 02 f6 b4 11 sd 0:0:0:0: [sda] Add. Sense: Scsi parity error end_request: I/O error, dev sda, sector 49722385 ata1: EH complete md: super_written gets error=-5, uptodate=0 raid1: Disk failure on sda5, disabling device. Operation continuing on 1 devices sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA RAID1 conf printout: --- wd:1 rd:2 disk 0, wo:1, o:0, dev:sda5 disk 1, wo:0, o:1, dev:sdb5 RAID1 conf printout: --- wd:1 rd:2 disk 1, wo:0, o:1, dev:sdb5 ata1.00: limiting speed to PIO4 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 ata1.00: BMDMA stat 0x64 ata1.00: cmd ca/00:08:b0:03:30/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 out res 51/84:00:b0:03:30/00:00:00:00:00/e1 Emask 0x10 (ATA bus error) ata1: soft resetting port ata1.00: configured for PIO4 ata1: EH complete sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA EXT3 FS on md1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver sit0: Disabled Privacy Extensions tun0: Disabled Privacy Extensions eth0: Setting full-duplex based on MII#1 link partner capability of 45e1. tun1: Disabled Privacy Extensions tun3: Disabled Privacy Extensions w83781d: Found a W83782D chip at 0x290 md: unbind md: export_rdev(sda1) md: bind RAID1 conf printout: --- wd:1 rd:2 disk 0, wo:1, o:1, dev:sda1 disk 1, wo:0, o:1, dev:sdb1 md: recovery of RAID array md0 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. md: using 128k window, over a total of 195968 blocks. md: unbind md: export_rdev(sda5) md: bind md: unbind md: export_rdev(sda6) RAID1 conf printout: --- wd:1 rd:2 disk 0, wo:1, o:1, dev:sda5 disk 1, wo:0, o:1, dev:sdb5 md: delaying recovery of md2 until md0 has finished (they share one or more physical units) md: bind RAID1 conf printout: --- wd:1 rd:2 disk 0, wo:1, o:1, dev:sda6 disk 1, wo:0, o:1, dev:sdb6 md: delaying recovery of md3 until md0 has finished (they share one or more physical units) md: md0: recovery done. md: recovery of RAID array md3 md: delaying recovery of md2 until md3 has finished (they share one or more physical units) md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. md: using 128k window, over a total of 14221248 blocks. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda1 disk 1, wo:0, o:1, dev:sdb1